Related topics

Hard disk dosen't recognise A: or C:
VFS: Disk change detected on device 2/0 8.6. What is a BogoMip? "BogoMips" is a combination of Bogus and Mips. MIPS stands for (depending on who you ask) Millions of Instructions per Second, or Meaningless Indication of Processor Speed. The number printed at boot time is the result of a kernel timing calibration,

Linux Frequently Asked Questions (Part 5 of 6)
Most boards these days are auto-detected and it should be the correct speed if that is the case. And also look at the bus speed of the motherboard to see if it is rated for that processor speed. The bios is not where the clock speed is determined but by whatever method the board uses on boot.

Win98 crashs on install & run w/503+[1.2a](more info)
If the multiplier and/or speed are not correct, the new cpu won't work, so you need to figure it out on your own. Here's how Processor speed = front side Another thing: even if you put old cpu in and went into win2k to manually change what win2k detected your cpu as, what if you pick the wrong value?

Done! Success overclocking from 33MHz to 50MHz.
These speed will vary slightly with processor speed and video card type. If you have Pentium Pro/II Optimization checked in your preferences and you turn it off The Video Statistics dialog shows the status of any 3D hardware detected by Virtual Pool 2. To enable/disable 3D hardware use the check box in the Game

system infomation
After changing this jumper the MoBo detected the CPU as Athlon XP 1800+ and ran at full speed. Obviously this is the wrong thing to do. Can anybody please advise me? I have not been able to locate a FSB speed jumper (as somebody suggested to me on nz.comp - and frankly I am not even clear on whether that would

NETDEV WATCHDOG transmit timed out
My system has 16550 UARTs, but Linux detected them as 16550AF, and for some reason, I got another speed boost when I used setserial to change the UART type from 16550AF to 16550. I have a Pentium 200MMX with a US Robotics Sportster 33.6 modem. Processor speed has nothing to do with download speed.

K7T266 Pro Auto Detect of CPU Speed?
Duh!?!, says I, and I reset the processor speed to 66 and went to a 3x multiplier and zip! We're in business! Many thanks, and I owe you a big one. I auto-detected the drives, and checked through the BIOS settings to set C: only boot, disabled floppy seek, disabled virus check, and disabled boot LAN first.

gmirror, sparc and SCSI problems
CLK represents your processor speed, with the exception that clock-multiple processors need to use the EXTERNAL clock rate, so a 486DX33, 486DX2/66, .... Once bad blocks are detected, their addresses are stored in the FAT so the operating system will skip them. Don't use this option to on AT-Bus (IDE),

Bogomips, caching and real speed
I've changed my BIOS to this: CPU speed: user defined Turbo frequency: disabled Clock (PCI): I've tried it at 133 and 100 Multiplier factor: I've used x6 for 133mz Speed error hold: disable since doing this, I've had the follow four problems: 1) I have a new processor speed detected almost every time I reboot.

detect wrong processor speed?
3583.60 MB or -537291776 Bytes Processor speed rating....: 229427 Original cache buffers....: 851057 Current Cache Buffers. ...... The configurator will check for tampering and abort if it is detected. #! ----------------------------------------------------------------------- #! #!SERVERTYPE=NORMAL #! #!

KR7A-RAID Detects wrong processor speed?
CLK represents your processor speed, with the exception that clock-multiple processors need to use the EXTERNAL clock rate, so a 486DX33, 486DX2/66, .... If you did something wrong and don't know what, select this. It will replace your BIOS settings by default values. You will have to start all over again.

detect wrong processor speed?
Amongst other things, its job is to flush the read buffer when it detects a disk change on the floppy disk drive: VFS: Disk change detected on device 2/0 MIPS stands for (depending who you listen to) Millions of Instructions per Second, or Meaningless Indication of Processor Speed.

Windows 2000 and Amd K6-2
Test time varies from different system, it is dependent on your processor speed, and the type of memory used. Press [ Esc ] button or click <CANCEL> to abort the test and subsequently .... DocMemory had detected the fail location at 1 Mb. In this example the read back data was [21802180], which is incorrect.

ntpd hostname and other things [was: testers wanted: public ...
I see nothing wrong in serial numbers per se. In fact I can see a legitimate use for them. For example, if Intel were to encode the processor speed within the s/n, then I would know whether I had been sold a re-marked CPU. If a bug were to be detected, then it would an easy matter to determine whether my CPU was

Processor Speed
This has the disadvantage that the cache of the PII only runs at half the processor speed (a thing that the pro didn't have to worry about). (or at least no errors were detected yet) Intel's FPU's in P II still sucks. Oh yeah and a friend of mine went to San Fransico to the Computer Convention up there at the

Video card for 2176-C33
VFS: Disk change detected on device 2/0 7.18 What is a BogoMip? "BogoMips" is a contraction of "Bogus MIPS." MIPS stands for (depending who you listen to) Millions of Instructions per Second, or Meaningless Indication of Processor Speed. The number printed at boot time is the result of a kernel timing calibration,

The Next Generation Nx586 w/h AMI BIOS (P5 Clone?)
63.63 MB or 66715648 Bytes Processor speed rating....: 3669 Original cache buffers....: 15754 Current Cache Buffers. ...... The configurator will check for tampering and abort if it is detected. #! ----------------------------------------------------------------------- #! #!SERVERTYPE=NORMAL #! #!UIMODE=NORMAL #!

Signaturar og oneliners
Mark although i know it's a 650MHz processor and is detected as such under 2.2.18pre22? it feels to me to be running at the proper speed, but with linux's awesome multitasking capabilities, maybe i just can't tell ;-) anyway, i haven't compiled the tpctl modules or installed them, so i haven't played with the fact

NDO on a new Dell machine
I'll know I shouldn't be concerned if there are others that had to change the FSB speed to 133 before the processor speed was read correctly. If on the other hand everyone with a 266fsb bus processor had to do nothing in the bios to get the processor speed detected correctly I'll know something is wrong.

Linux Frequently Asked Questions with Answers (Part 5 of 6)
This is a value that depends on your PC's processor speed. 80 is a good value that works for most Pentiums. If you have a very fast one, you might have to If it tells you that there is no drive, then the setup is completely wrong (eg wrong LPT port). If only the timing is wrong, it would rather hang during